BOLT TYPE · SCREW-FIXED METAL ROOFING

Screw-Fixed Metal Roofing ST-40-750

Starting price:

55-280 THB/m

Thickness

Thickness from 0.30 mm

Order Now Inquire at Nearest Branch

** Prices are subject to change. Please confirm with your nearest branch before ordering.

FEATURES

Key Features and Optimal Lengths for Roof Pitches of Profile STR-40-750

1.Features an extra-wide profile to reduce total sheet count and optimize material savings. Rib height is 40 mm, effective cover width is 750 mm, with 5 ribs per sheet, each reinforced with mini-rib seams for enhanced strength and aesthetics.
2.Suitable for roof pitches from 3° and above, depending on sheet length and anticipated rainfall volume.
3.Framing and purlins must be properly aligned and leveled to ensure unobstructed water drainage. Recommended purlin spacing should not exceed 1.20 m, depending on sheet thickness.
4.Suitable for both roofing and wall cladding applications.
5.Ideal for residential roofs, small industrial factories, agricultural farm roofs, ceiling panels, and more.
6.Double pan ribs in the sheet valley provide additional structural reinforcement.
7.Capable of natural sprung curve installation (SPRUNG CURVED ROOFING) with a minimum convex radius of 38 m.
8.Screw-fixed installation system (BOLT TYPE) with connector brackets, using 48 mm and 16 mm fastener screws for steel purlins.

Order Now Manufactured at Rayong / Korat branches

Recommended Lengths by Roof Pitch Table
STR-40-750

Roof Slope / Pitch

SANGTHAI ROOF STR-40-750	2°	3°	4°	5°
Maximum Roof Sheet Length	–	–	17	22

Note: The displayed specifications serve as a preliminary guideline. Roof pitch and structural integrity must be verified prior to actual installation. Specifications may vary based on actual on-site conditions.